inform AC/DC Systems

Info Charger


AC / DC Power Supply
25Amp to 200Amp

- Microprocessor Controller.
- IGBT Technology ( ICH Series ).
- PFC Technology ( ICC Series ) .
- Transformerless Design.
- Wide Input Voltage Range.
- Operation according to constant voltage and current principle.
- Adjustable Boost and Nominal Charge Voltage.
- Adjustable Output Current.
- High Voltage, Over Current, Short Circuit Protections.
- Over Temperature Protection.
- Alphanumerical LCD Display and Control Panel.
- Low DC Voltage Protection (LVD)- Optional.
- Dry Contact Alarms- Optional .
- Parallel Connection Availability at ICH Series- Optional .
- Small Footprints, Compact Size.

Info Charger Technical Specifications

TYPE ICC2460 ICC4830 ICC11015 ICH122450 ICH1224100 ICH1224200 ICH4850 ICH48100 ICH11025 ICH11050
Power 60Amp 30Amp 15Amp 50Amp 100Amp 200Amp 50Amp 100Amp 25Amp 50Amp
DC Voltage 24VDC 48VDC 110VDC 12 or 24VDC 48VDC 110VDC
INPUT
Input Phase 1Phase 1phase / 3Phase
Nominal Voltage Range 90-265VAC 176-280VAC ( Ph - N )
Frequency Range 50/60Hz ± 10%
Power Factor >0,98 >0,8
OUTPUT
Nominal Voltage 24VDC 48VDC 110VDC 12VDC or 24VDC 48VDC 110VDC
Nominal current 50Amp 50Amp 25Amp 50Amp 100Amp 200Amp 50Amp 100Amp 25Amp 50Amp
Output Current Adjustment value 0 to 50A 0 to 50A 0 to 25A 0 to 50A 0 to 100A 0 to 200A 0 to 50A 0 to 100A 0 to 25A 0 to 50A
Max Output Current 110% of Inominal
Boost Charge Voltage 100% - 120% of the nominal output voltag
Output Fluctuation <1% rms AC Output Voltage
Dynamic Response less than 2% of output voltage
Output protection electronic short circuit / over voltage

Battery Charger
30Amp to 400Amp

- Microprocessor controlled Thyristor Technology.
- Built in output transformer topology.
- Fully Adjustable float, boost and equalizing charge modes with V/I characteristics.
- Advanced technology for phase control.
- Very low voltage ripple and extended battery life.
- High efficiency and low operation cost.
- Ability to operate as voltage or current source.
- Wide range of options for monitoring.
- Improved environmental operation characteristics.
- Remote monitoring via RS232 communication port.
- Potential free alarm contacts on extended alarm board.
- Internal Over Temperature protection.
- User Friendly Control Panel

Battery Charger Technical Specifications

DC Voltage 24VDC 48VDC 110VDC 220VDC
INPUT
Input Phase 3Phase
Nominal Voltage Range 3x380V or 3x400V ± 15 % – 4 wire
Frequency Range 47-63Hz
OUTPUT
Nominal Voltage 24VDC 48VDC 110VDC 220VDC
Max Output Current 110% of Inominal
Float Charge Adjustment Range 80% - 115% of the nominal output voltage
Boost Charge Voltage 80% - 125% of the nominal output voltage
Equalizing Charge Adjustment Range 80% - 125% of the nominal output voltage
Current Limit Adjustment Range 25% - 100% of the nominal output voltage
Voltage Ripple < 1% (with or without battery)
Voltage Regulation < 1% (10% to 100% load)
Efficiency 80% 90%